Clear labeling for your individual needs Fast and reliable MultiMark labeling based on heat shrink tubes
Identification of individual conductors in the control cabinet facilitates maintenance and troubleshooting. However, until today it was difficult to transfer data from the design system to the conductor so that the marker was compact, easy to use, and contrasting over time.
MultiMark shrink materials can be printed with the Weidmüller THM MMP thermal transfer printer in a few seconds. The flexible material of the marker tube can easily be detached from the substrate, put on the conductor and seated using heat, for example, using an industrial hot air gun, so that it fits tightly around the conductor.
The combination of MultiMark shrink markers and the THM MMP universal printer makes marking individual conductors quick and economical.
Halogen-free polyolefin is made in accordance with DIN EN 45545 HL2 and BS 6853. Therefore, it is suitable for applications in the transport, marine sector.
MultiMark heat-shrink tubes comply with the standards for marking cables and conductors: wear resistance – in accordance with DIN 72551-5 / 1992-02-00, salt spray resistance – in accordance with DIN EN 9227 / 2015-09-00 and DIN 50021 SS and chemical resistance – in accordance with DIN EN ISO 2812-4 / 2007-05-00.
Does not increase the diameter of the conductor
Markers are simply installed on the conductor, they are close to the size of the conductor even before the heat shrink process. The assembly becomes as convenient as possible, the shrinkage coefficient of the marker is 2: 1 or 3: 1.