ASSESSMENT SYSTEMS
MULTI-FUNCTION COUNTERS 1000
dimensions 48 x 24 x 48 mm
pulse counter
elapsed time counter
- Activation from 10 to 260 V AC / DC (depending on version)
- electric reset
- lockable reset button on the front panel
- master zero suppression
- LCD
- pulse counter
- sampling frequency up to 12 kHz
- Display range P -9999999 … 99999999 < / li>
- elapsed time counter
- elapsed hours counter
- recording time in hours, minutes, seconds or seconds and 1/10 sec.
MULTI-FUNCTION COUNTERS 1050
Dimensions 48 x 48 x 91mm
pulse counter
frequency counter
elapsed time counter
- Pulse, frequency and elapsed time counter in one device
- various types of programmable counting
- entering presets using buttons or learning
- 2 x 6-digit LCD with backlight
- simultaneous display of counter readings and set value
- scalable display
- built-in totalizer
- potential-free relay outputs
- colorful display
- gt data memory; 10 years through EEPROM
MULTI-FUNCTION COUNTERS 1200
dimensions 48 x 48 x 106.6 mm
counter of impulses and elapsed time
timer
- 5-digit LED display, approx. Height 8 mm
- leading zero suppression
- up / down counting, programmable up to 10 kHz
- various types of programmable counting
- input A and B, 90 ° phase-shifted
- adjustable scale factor
- auxiliary voltage 24 V DC for AC operation
- data memory gt; 10 years through EEPROM
- various functions of counting time and time relay
- also available with digital outputs
PULSE COUNTERS 1400
Dimensions 72 x 72 x 133 mm
counting directions, adding
counting direction, subtracting
- LED display, 4-digit, height 14 mm
- up / down counter programmable, 20/1500 Hz selectable
- inputs via optocoupler
- auxiliary voltage
voltage 24 V DC, 150 mA automatic repetition cycle (timer output from 0.1 s to 1 s) Storage period 5 years external reset
ELAPSED-TIME COUNTERS 1500
Dimensions 72 x 72 x 133 mm
power-on delay
shutdown delay
- LED display, 4-digit, height 14 mm
- delays and elapsed time counter (quartz time base)
- programmable forward / backward counting
- start input, stop input
- auxiliary voltage 12 V DC, 30 mA, with AC operation < / li>
- 8 adjustable time ranges from 0.01 s to 999.9 hours
- Shelf life 5 years
- external discharge
TIME DELAY RELAY 1700
Dimensions 22.5 x 75 x 110 mm
Multifunction On Delay
On delay, instant
with the passage to establish contact
Shutdown Delay
Heartbeat Timing
timing, starting with a break
pulse shaping
star / triangle switching
- functions and time ranges are regulated using the DIP switch
- long time intervals with high repeat accuracy
- 2 internal relays / switching contacts
- external operation using a remote potentiometer
- broadband power supply
- DIN enclosure for mounting on a DIN rail
- LED display
MONITORS 2200
dimensions 22.5 x 90 x 97 mm
1 … 120,000 pulses per minute
- recognition of overspeed or reduced stop speed (the function is switched)
- adjustable hysteresis 0.5 … 50%
- adjustable start time at start 0 … 50 s
- Status indicator for auxiliary voltage, measuring input and output relay
- 2 changeover contacts, closing current principle (relay drops out in case of alarm)
- universal input, for various sensors configurable
- reacts even at lower rotational speeds
DIGITAL MOTOR OVERSPEED PROTECTION 2250
dimensions 85 x 65 x 35.6 mm
frequency range adjustable from 10 to 800 Hz
th exit Mounting on a DIN rail LED display terminal connection
MONITOR 2300
dimensions 96 x 48 x 141 mm
analog / digital
- 2 pulse inputs and 1 reset input
- programmable measurement function for: rotation speed, speed, machine cycles, processing time (reverse rotation speed), a wide range of counts and stopwatch function of speed versus time run
- power converter + 24 V DC
- adjustable scale factor
- 6-digit LED display 15 mm high
- screw terminals < / li>
COUPLER RELAY 2400
Dimensions 15.4 x 78.6 x 75 mm
switching relay contact
Holders
accessories
- connection relay in a 5mm grid up to 16A
- authorization in accordance with VDE, S, SEV, UL, CSA
- LED display, updated as a module
- Relays with holders that can be added to a 35 mm DIN rail (DIN EN 60715 TH35)
- Holders with rugged screw terminals
- guaranteed mechanical life 107 operating cycles