Standard enclosures

Aluminum cases

Rugged aluminum housing for mechanical engineering and automation. Mounting options for DIN-rails and mounting plates.
Used in a wide temperature range.

• Material DIN EN 1706 EN AC-AlSi 12 (Fe)
• Varnishing: powder coating
• Paint color RAL 7001, silver gray, special varnishing optional
• Type of protection IP 66 according to EN 60529, higher type of protection on request
• Impact strength of 7 Joules according to EN 60079-0
• EMC on order
• Temperature resistance:
  PU gasket (polyurethane) (standard): -40 ° C to + 90 ° C;
  CR gasket (chloroprene): -40 ° C to + 100 ° C;
  VMQ gasket (silicone) (optional): -60 ° C to + 130 ° C

Molded aluminum cases

Cast aluminum housing for instrumentation and automation technology. Prepared for installing front membranes and membrane keypads.
The rectangular arrangement of fasteners in the lid and base.

• Material DIN EN 1706 EN AC-AlSi 12 (Fe)
• Varnishing: powder coating
• Paint color 7038, agate gray, special varnishing optional
• Type of protection IP 66 according to EN 60529, higher type of protection on request
• Impact strength of 7 Joules according to EN 60079-0
• EMC on order
• Temperature resistance:
  PU gasket (polyurethane) (standard): -40 ° C to + 90 ° C;
  CR gasket (chloroprene): -40 ° C to + 100 ° C;
  VMQ gasket (silicone) (optional): -60 ° C to + 130 ° C

Aluminum enclosures with flange holes

• Material DIN EN 1706 EN AC-AlSi 12 (Fe)
• Varnishing: powder coating
• Paint color RAL 7001, silver gray, special varnishing optional
• Type of protection IP 65 according to EN 60529, higher type of protection on request
• Impact strength of 7 Joules according to EN 60079-0
• EMC on order
• Temperature resistance:
  PU gasket (polyurethane) (standard): -40 ° C to + 90 ° C;
  CR gasket (chloroprene): -40 ° C to + 100 ° C;
  VMQ gasket (silicone) (optional): -60 ° C to + 130 ° C

Polyester cases

Rugged plastic case for mechanical engineering and automated technology. Mounting options for DIN-rails and mounting plates. Universal design.

• Fiberglass reinforced material, thermosetting polyester
• RAL 7000 paint color, gray squirrel, other colors on request
• Type of protection IP 66 according to EN 60529
• Impact strength of 7 Joules according to EN 60079-0
• Burning performance: self-extinguishing, UL 94 V-0
• Protective insulation: full protective insulation according to VDE 0100
• Dielectric strength: 18 kV / mm, IEC 60243-1
• Surface resistance: gt; 10 ¹² Ohm, IEC 60093
• Toxic: halogen free
• EMC on order
• Temperature resistance:
  PU gasket (polyurethane) (standard): -40 ° C to + 90 ° C;
  CR gasket (chloroprene): -40 ° C to + 100 ° C;
  VMQ gasket (silicone) (optional): -60 ° C to + 130 ° C

CombiBox polyester cases

Housing systems in fiberglass reinforced polyester resin for industrial applications. Ability to install in two levels. It is possible to connect several housings with a connecting flange.

• Fiberglass reinforced material, thermosetting polyester
• RAL 7000 paint color, gray squirrel, other colors on request
• Type of protection IP 66 according to EN 60529
• Impact strength of 7 Joules according to EN 60079-0
• Burning performance: self-extinguishing, UL 94 V-0
• Protective insulation: full protective insulation according to VDE 0100
• Dielectric strength 18 kV / mm, IEC 60243-1
• Surface resistance lt; 10 ¹² Ohm, IEC 60093
• Toxic: halogen free
• Temperature resistance:
  PU gasket (polyurethane) (standard): -40 ° C to + 90 ° C;
  CR gasket (chloroprene): -40 ° C to + 100 ° C;
  VMQ gasket (silicone) (optional): -60 ° C to + 130 ° C

Polyester cases with flanges

Plastic case with holes for flanges for automated technology. Possibility of connection with other polyester flange housings. Possibility of quick assembly-disassembly.

• Fiberglass reinforced material, thermosetting polyester. Transparent Cover: Polycarbonate
• Paint color RAL 7032, silicon gray
• Type of protection IP 65 according to EN 60529
• Impact strength of 7 Joules according to EN 60079-0
• Burning characteristic: self-extinguishing, UL 94 V-0, transparent cover: UL 94 V-2
• Protective insulation: full protective insulation according to VDE 0100
• Dielectric strength: housing – 24 kV / mm, IEC 60243-1, transparent cover – 30 kV / mm, IEC 60243-0
• Surface resistance: housing – gt; 10 ¹¹ Ohm, IEC 60093, transparent cover: gt; 10 ¹⁵ Ohm, IEC 60093
• Toxic: halogen free
• Temperature resistance:
  PU gasket (polyurethane) (standard): -40 ° C to + 90 ° C;
  CR gasket (chloroprene): -40 ° C to + 100 ° C;
  VMQ gasket (silicone) (optional): -60 ° C to + 130 ° C

Polyglas / Polycase plastic enclosures

Enclosure system with hidden exterior joints. Standard version or with a window. Polycase version with integrated handle.

• Fiberglass reinforced material, thermosetting polyester
• Paint color RAL 7038, agate gray. Other colors on request
• Type of protection IP 66 according to EN 60529
• Impact strength of 7 Joules according to EN 60079-0
• Burning performance: self-extinguishing, UL 94 V-0
• Protective insulation: full protective insulation according to VDE 0100
• Dielectric strength: 18 kV / mm, IEC 60243-1
• Surface resistance: gt; 10 ¹² Ohm, IEC 60093
• Toxic: halogen free
• Door opening angle – 135 °
• Temperature resistance:
  from -40 ° C to + 100 ° C;
  from -40 ° C to + 80 ° C, version with sight glass

Mini-Polyglas plastic enclosures

Mini-Polyglas enclosure with concealed external hinges for instrumentation. Standard version or with a window.

• Fiberglass reinforced material, thermosetting polyester
• Paint color RAL 7038, agate gray. Other colors on request
• Type of protection IP 66 according to EN 60529
• Impact strength of 7 Joules according to EN 60079-0
• Burning performance: self-extinguishing, UL 94 V-0
• Protective insulation: full protective insulation according to VDE 0100
• Dielectric strength: 18 kV / mm, IEC 60243-1
• Surface resistance: gt; 10 ¹² Ohm, IEC 60093
• Toxic: halogen free
• Door opening angle – 120 °
• Temperature resistance:
  from -40 ° C to + 100 ° C;
  from -40 ° C to + 80 ° C, version with sight glass

Cabinets from ABS

Enclosure system with hinged lid for instrumentation technology. Standard version with either a window or a transparent door (ABS).

• Fiberglass reinforced material, thermosetting polyester
• Paint color:
  Polyester: RAL 7032, silicon gray;
  ABS: RAL 7035, light gray;
  Other colors on request
• Type of protection IP 65 according to EN 60529
• Impact strength of 7 Joules according to EN 60079-0
• Burning performance: self-extinguishing, UL 94 V-0
• Protective insulation: full protective insulation according to VDE 0100
• Dielectric strength: 26 kV / mm, IEC 60243-1
• Surface resistance: 4×10 ¹⁵ Ohm, IEC 60093
• Toxic: halogen free
• Door opening angle – 135 °
• Temperature resistance:
  from -55 ° C to + 90 ° C,
  with sight glass: -55 ° C to + 80 ° C

Polycarbonate bodies

Lightweight plastic housing for industrial use. Polycarbonate housing with standard or transparent cover. Optional version with EMC coating.

• Polycarbonate Material
• Paint color 7035, light gray, other colors on request
• Type of protection IP 66 according to EN 60529
• Impact strength of 7 Joules according to EN 60079-0
• Burning performance: UL 94 V-0
• Protective insulation: full protective insulation according to VDE 0100
• Dielectric strength: 30 kV / mm, IEC 60243-1
• Surface resistance: gt; 10 ¹⁵ Ohm, IEC 60093
• Toxic: halogen free
• Door opening angle – 135 °
• Temperature resistance: -40 ° C to + 100 ° C, CR gasket (chloroprene)

Polycarbonate enclosures with flanges

Lightweight plastic housing for industrial use with flanges. Possibility of connection with other polycarbonate flange housings. Possibility of quick assembly-disassembly and quick installation of flanges. Options with standard and transparent cover.

• Polycarbonate Material
• Paint color RAL 7032, silicon gray
• Type of protection IP 65 according to EN 60529
• Impact Strength 7 Joules according to EN 60079-0 (except for preliminary stamping of flanges)
• Burning characteristic:
  housing – self-extinguishing, UL 94 V-0
  transparent cover – UL 94 V-2
• Protective insulation: full protective insulation according to VDE 0100
• Dielectric strength: gt; 18 kV / mm, IEC 60243-1
  transparent cover: gt; 30 kV / mm, IEC 60243-1
• Surface resistance: gt housing; 10 ¹⁵ Ohm, IEC 60093
• Toxic characterization: low halogen content
• Temperature resistance:
  case: from -40 ° C to + 100 ° C, (incl. CR-strip in the form of a round cord)
  transparent cover: from -40 ° C to + 100 ° C, (incl. CR-strip in the form of a round cord)

ABS enclosures

Lightweight plastic housing for industrial use. ABS housing with standard cover. Optional version with EMC coating.

• ABS material
• Paint color RAL 7035, light gray. Other colors on request
• Type of protection IP 66 according to EN 60529
• Impact strength of 7 Joules according to EN 60079-0 (except for pre-stamping flanges)
• Burning performance: UL 94 HB
• Protective insulation: full protective insulation according to VDE 0100
• Dielectric strength: 24 kV / mm, IEC 60243-1
• Surface resistance: 4×10 ¹⁴ Ohm, IEC 60093
• Toxic: halogen free
• Temperature resistance: -40 ° C to + 80 ° C, CR gasket (chloroprene)

ECO Compact Enclosures

Thermoplastic housing for industrial use. Base with smooth side walls, with a standard or transparent cover.

• Material Thermoplast PS
• Paint color RAL 7035, light gray. Other colors on request
• Type of protection IP 66 according to EN 60529
• Impact strength 2 Joules according to EN 60068-2-75
• Burning performance: UL 94 HB
• Protective insulation: Protection class II according to VDE 0100
• Weather resistance: well protected from direct sunlight
• Chemical stability: generally not resistant to gasoline, diesel, oil and grease, as well as strong acids
• Toxic characterization: low halogen content
• Temperature resistance: -25 ° C to + 40 ° C

PCI Compact Enclosures

Thermoplastic housing for industrial use. Base with removable plugs for cable entries.

• Material Thermoplast PS
• Paint color RAL 7035, light gray. Other colors on request
• Type of protection IP 66 according to EN 60529
• Impact strength 2 Joules according to EN 60068-2-75
• Burning performance: UL 94 HB
• Protective insulation: Protection class II according to VDE 0100
• Weather resistance: well protected from direct sunlight
• Chemical stability: generally not resistant to gasoline, diesel, oil and grease, as well as strong acids
• Toxic characterization: low halogen content
• Temperature resistance: -25 ° C to + 40 ° C

Fireproof enclosures

Housing with fire protection made of special halogen-free polyester. Enclosure system with general technical inspection according to DIN 4102, part 12. Individual modification with specially approved ceramic terminals and cable entries.

• Fiberglass reinforced material, thermosetting special polyester
• Paint color: RAL 2004, orange
• Seal round CR cord
• Test report P-MPA-E-02-024
• Test report: General test report of the construction department
  according to test according to DIN 4102, Part 12
• Temperature resistance: -40 ° C to + 90 ° C

CS Box Polyamide Enclosures

Impact-resistant polyamide housing for the individual installation of 22.5 mm control switches (mounted on a cover or on a DIN rail) and control lights. The choice is with 22.5 mm holes in the lid or without processing. Cable holes inputs M20 / M25 on two sides.

• Material Polyamide 6
• Paint color: lower part of RAL 9005, blue-black, upper part: RAL 7035, light gray
• Type of protection IP 65 according to EN 60529
• Impact strength of 7 Joules according to EN 60079-0
• Burning performance: UL 94 V-2
• Surface resistance: 10 ¹² Ohm, IEC 60093
• Temperature resistance: -20 ° C to + 60 ° C

Cable entries

• Material Polyamide 6 V2
• Color RAL 7035, light gray
• Type of protection IP 68 – 5 bar
• Temperature resistance: -20 ° C to + 100 ° C